Treatment of Storm Water:

MyCelx Stormwater Filters instantaneously and permanently remove gross oil and solids from water. The filters do not foul & clog and can be used until they are fully saturated, at which time they have a high BTU residual fuel value as they only hold less than 1% of water. The filters can be deployed in stormdrain inserts, outfall protection and as final polishing oil removal systems when the oil removal requirement from water is greater than 40 PPM under heavy solids loading.

MyCelx PermaKleen Filters & Snippets:

  • High capacity gross oil and solids removal from water
  • Permanent immobilization of the oil in the MyCelx media.
  • Does not build pressure drop even upon complete saturation with oil and solids i.e. It does not foul or clog
  • Offer robust gross oil and solids fouling protection to Pleated/ Depth Particle Filters, MyCelx Oil Removal cartridges and Back washable media filters.
  • Delivered as dry media - no chemicals or liquid
  • Deployed in storm water drain inserts and as final polishing oil removal systems when the oil removal requirement from water is greater than 40 ppm under heavy solids loading.
  • The media is delivered in mesh bags (3 mm mesh) or in Standard P2/P3 style bag filters for ease of handling and maintenance.
  • Hydrophobic. Spent oily media holds less than 1% water; therefore saturated cartridge has high BTU residual fuel value due to high oil content and very low water content.
  • Typical flow capacities of MyCelx Snippets media based systems: 20gpm -10,000 gpm

Technical Data Sheets

 
COPYRIGHT 2015 GROUND FORCE ENVIRONMENTAL INC.
HOME | CONTACT US